Durable Fireman Suit 850N Breaking Strength With Waterproof Breathable Layer

                       Firefighting Used Fire Security Protect Fireman Escape Fire Suit

Product display:                                                                                            

Product Introductions and Structure:                                                              

Description

1. The Starye fire suit manufactures takes advanced flame retardant material. The scientific design and quality manufacture ensures the life safety of fire fighters as much as possible.

2. The fire suit conform to China GA12-2002 standard, Europe EN469 and USA NFPA1971-2000. It is separated type, four-layers structure made of X-FIPER™ nomex fiber, 3M, Janpan Teijin Aramid and USA DBI etc. Wear-resisting design on neck, waist, elbow and knees, lining removable.

3. Features of fire suit are inflaming retarding, moisture resistant, ventilate, thermal resisting, wear resisting.

4. TPP>28/Total Weight less than 3.2kg

5. Various sizes: S/M/L/XL/XXL/XXXL

Application

This fire suit used to put out a fire in a close distance

Features

1. This fire suit won't have any change or damage being burned by lighter within 5s;

2. The fire suit will begin to carbonize after being burned longer than 5s, but will never get fired;

3. When you take away the lighter after burning it for a long period, there might be a little spark onside but the spark will disappear within 2s;

4. This fire suit can work normally in environment of 250℃ for long time;

5. The performance of the fire suit might be worse than normal condition when the temperature reaches into 280℃, but can still work;

6. When the temperature reaches 350℃degree, the fire suit will begin to carbonize.

Product Technical Specification:                                                                    

◆ fabric flame retardant properties: length of damage ≤90mm, continued burning time ≤2s

◆ fabric strength: Tear strength ≧ 100N, breaking strength ≧ 850N

◆ thermal stability: After 260 ± 5 ℃ thermal stability test, the warp and weft shrinkage ≤2%

◆ waterproof breathable layer of hydrostatic pressure washed after 25 times greater than

    50KPa, water vapor permeable properties ≧ 5000g / m² • 24h, according to oil ≧ grade 3

◆ four-layer structure of TPP> 32cal / cm²9. Visible horizons greater than 120 °

Maintenance Requirements:                                                                            

  Preparation before use in accordance with the protection of media protection and air supply means selection applies. According to the user's height and the size of hand, foot and to use the appropriate protective boots and gloves, and install the pinch seal on protective clothing.
  Check the ministries connected correctly, sealing is reliable, clothing materials harmony lens is aging, discolored or damaged. Check the gas supply device is normal, according to the terms of its gas supply apparatus equipped with provisions of the Manual to be checked.
  Note the use of a portable breathing apparatus when used in combination, when the respirator issued residual gas alarm, the user should be immediately evacuated. Car and long tube breathing apparatus when used, should be located in the device at a supervised parking, always observe the high, medium gauge value changes, and keep in touch with people working in the field, when the air supply breathing apparatus found abnormal phenomenon, shall immediately notify the person within the site evacuated. Users feel sluggish breathing, discomfort or tear discovery pipeline road, stuck, protective clothing tear fault should evacuate immediately following the scene. If the fire accident scene, after the initial fire extinguishing invalid, should be immediately evacuated.
 

Used and Store Maintenance :                                                                        

  After taking protection immediately with decontamination temperature at the end of the decontamination, removal of contaminants remnants, then rinse with water, hung in a cool ventilated place to dry naturally.

Protective clothing should not be folded and stacked, should be hung in a clean and dry place, in order to avoid being affected by sun exposure, toxic gases, corrosive media abuse.

  Protective clothing should be applied inside and outside surfaces of talcum powder and smear grease on the sealing zipper lubricants, adhesion prevention, aging, to ensure life. Protective clothing storage conditions at aging general store for three years. Protective clothing should be checked regularly maintained to ensure safety and proper function play base.

Transportation:                                                                                               

F.A.Q:                                                                                                            

Q. WHAT'S A FIREMAN SUIT?

A.A fire proximity suit (also, silvers, silver bunker suit, or asbestos suit) is a suit designed to

   protect a firefighter from high   temperatures, especially near fires of extreme temperature

   such as aircraft fires. They were first designed and used in the 1930s.

Q. ARE YOU THE MANUFACTURER OT THE TRADING COMPANY ?

A. We are the own manufacturer and the trading in order supply  a complete services.

Q. WHY WE CHOOSE YOU ?WAHT'S YOUR STRENGTH ?

A. We are experienced and professional, we offer high quality products, perfect services

     and complete business services.Help U to collect others goods in China.

Q. WHAT IS YOUR DELIVERY TIME ?

 A. Normally, received your deposit, we could finish the production within 7-30days.

Q. CAN YOU CUSTOMIZE THE PRODUCTS AS PER OUR REQUESTS?

 A. Yes, we offer OEM and ODM services.
      a. Print Logo on the product
      b. Customeized products shell
      c. Customized packing.